Product ID:XUPER 16 XFC 3/32,E 1358
MSDS Date:03/15/1993
FSC:3439
NIIN:01-050-5950
MSDS Number: BWMQY

EUTECTIC CORP

40-40 172ND STREET
FLUSHING, NY 11358-2799
US

Emergency Phone: 718-358-4000

Info Phone: 718-358-4000

Cage: 72271

EUTECTIC CORP

CHARLOTTE, NC 28273 US

Telephone: 704-527-9800/ 800-221-1433

Cage: 72271

COPPER (SARA 313) (CERCLA)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: 30 - 40%

OSHA PEL 0.1MG/M3 FUME/1 DUST

ACGIH TLV: 0.2 MG/M3 FUME; 9495

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ZINC (SARA 313) (CERCLA)

CAS: 7440-66-6

RTECS: ZG8600000

Fraction By Weight: 30 - 40%

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

NICKEL (SARA 313) (CERCLA)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 5 - 10%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9495

BORIC ACID

CAS: 10043-35-3

RTECS: ED4550000

OSHA PEL 10 MG BORATES/M3

ACGIH TLV: 5 MG BORATES/M3

ACRYLIC OLIGOMER/RESIN

CAS: 9003-01-4

RTECS: AT4680000

LD50 LC50 Mixture:LD50 (ORAL RAT) IS NOT RELEVANT.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:TARGET ORGANS:LUNGS, EYES, SKIN.
ACUTE- NO HAZARD BEFORE WELDING. WELDING FUMES CAN CAUSE
IRRITATION, DIZZINESS, HEADACHE, NAUSEA, COUGH, CHEST PAINS, METAL
FUME FEVER, BODY ACHE, CHILLS, UNCONSCIOUSN ESS. ARC RAYS & UV CAN
INJURE EYES & BURN SKIN. ELECTRIC SHOCK CAN KILL. ORAL:MAY BE
HARMFUL/FATAL. CHRONIC- UNKNOWN.
Explanation of Carcinogenicity:CONTAINS NICKEL.
Effects of Overexposure:EYES, SKIN, RESPIRATORY TRACT IRRITATION,
DIZZINESS, WATERY EYES, HEADACHE, NAUSEA, BREATHING DIFFICULTY,
COUGHING, CHEST PAINS, FEVER, BODY ACHE, CHILLS. EYE INJURY, SKIN
BURNS, CONVULSION, MUSCULAR WEAKNESS, LOSS OF CONSCIOUSNESS
Medical Cond Aggravated by Exposure:PERSONS WITH IMPAIRED PULMONARY
FUNCTION, AIRWAY DISEASES AND CONDITIONS SUCH AS ASTHMA, EMPHYSEMA,
CHRONIC BRONCHITIS, ETC... CAN BE AGGRAVATED BY THE EXPOSURE.

First Aid:GET MEDICAL ATTENTION IF SYMPTOMS PERSIST. EMPLOY FIRST AID
TECHNIQUE RECOMMENDED BY RED CROSS. IF BREATHING IS DIFFICULT,
PROVIDE OXYGEN AND CALL PHYSICIAN. PROVIDE CPR IF NEEDED. FOR
ELECTRIC SHOCK, DISCONNECT POWER. FOR ARC BURNS, APPLYCOLD, CLEAN
COMPRESSES AND CALL A PHYSICIAN. IF IN EYES, FLUSH WITH WATER FOR
15 MINUTES. IF INGESTED, CALL PHYSICIAN.

Flash Point:NONFLAMMABLE
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE, FOAM
Fire Fighting Procedures:WEAR FULL PROTECTIVE CLOTHING AND
NIOSH-APPROVED SELF-CONTAINED BREATHING APPARATUS WITH FULL
FACEPIECE OPERATED IN THE POSITIVE PRESSURE MODE.
Unusual Fire/Explosion Hazard:WELDING ARC AND SPARKS CAN IGNITE
COMBUSTIBLES. SOME FLUXES AND CHEMICAL AIDS MAY GIVE OFF HYDROGEN
CHLORIDE, PHOSGENE AND CHLORINE GASES. CANS MAY EXPLODE.

Spill Release Procedures:WEAR PROTECTIVE EQUIPMENT. SWEEP UP OR VACUUM.
CAREFULLY TRANSFER INTO A SEALABLE WASTE CONTAINER. MINIMIZE
GENERATION OF DUST.
Neutralizing Agent:NOT RELEVENT

Handling and Storage Precautions:STORE IN DRY, VENTILATED AREA AWAY
FROM ACIDS.
Other Precautions:AVOID BREATHING OF FUMES. USE WITH ADEQUATE
VENTILATION. WASH THOROUGHLY AFTER HANDLING AND BEFORE EATING AND
DRINKING.

Respiratory Protection:USE NIOSH APPROVED SUPPLIED AIR RESPIRATORY
PROTECTION OR RESPIRABLE FUME RESPIRATOR WHEN WELDING, BRAZING OR
SOLDERING IN CONFINED SPACE OR WHERE LOCAL EXHAUST OR VENTILATION
DOES NOT KEEP EXPOSURE B ELOW TLV.
Ventilation:LOCAL EXHAUST VENTILATION SHOULD BE USED TO CONTROL
EXPOSURE TO AIRBORNE FUMES WHENEVER POSSIBLE.
Protective Gloves:FLAME-PROOF WELDING GLOVES
Eye Protection:SAFETY GLASSES UNDER WELDING HELMET
Other Protective Equipment:EYE WASH STATION AND SAFETY SHOWER, WORK
CLOTHING AND APRON AS REQUIRED.
Work Hygienic Practices:OBSERVE GOOD PERSONAL HYGIENE PRACTICES AND
RECOMMENDED PROCEDURES. DO NOT WEAR CONTAMINATED CLOTHING.
Supplemental Safety and Health

HCC:T6
NRC/State Lic Num:NOT RELEVENT
Viscosity:NOT RELEVANT
Evaporation Rate & Reference:NOT RELEVENT
Appearance and Odor:ELECTRODE

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS
Hazardous Decomposition Products:COMPLEX OXIDES OF COPPER, ZINC,
NICKEL; OZONE, CARBON MONOXIDE, CARBON DIOXIDE, OXIDES OF NITROGEN
& CERTAIN INERT GASES

Waste Disposal Methods:PRIOR TO DISPOSAL, CONSIDER IF MATERIAL HAS
RECOVERY VALUE. DISPOSE OF IN ACCORDANCE WITH ALL LOCAL, STATE AND
FEDERAL REGULATIONS. PREVENT WASTE FROM CONTAMINATING ENVIRONMENT.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.